[TRNSYS-users] Problem with azimuth of surface

[David BRADLEY]

Afolayan,
   There are a number of different weather data components and solar 
collector components that you might be using and the answer to your 
question depends somewhat on which combination you are using. In general 
make sure that you have set the azimuth in both the weather data reader 
and if applicable, in the solar collector model. Also make sure that you 
have correctly connected the solar radiation outputs from the weather 
data reader to the solar collector (through the radiation processor if 
applicable).
   You may contact your distributor directly. While technically Trnsys16 
has not been supported since a more recent version was released in 2009, 
they may be willing to have a look at your project.
Regards,
  David


On 9/20/2013 05:18, Ayoola Afolayan wrote:
>
>>
>> Hello,
>>          I am a new TRNSYS 16 user. I am running a simulation on 
>> solar water heating and i tried to change the azimuth of surface 
>> value in the weather component in order  to determine the angle where 
>> optimum solar radiation can be received but the result doesn't seem 
>> to make any difference irrespective of the value i give to the 
>> azimuth. i will like to know why this is so and what can be done to 
>> correct that.
>> Thank You
>>
>> Afolayan Ayoola O
>> Department of Mechanical Engineering
>> EMU, T.R. North Cyprus
>>
>>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130923/12d4ef4a/attachment-0001.htm>