[TRNSYS-users] TYPE2b issue

[Adeel Waqas]

Dear Trnsys users



I facing problem while using controller Type 2b between solar water heater
and storage tank. i have spent several hours in understanding its behavior
but still i am confused.

Issue is i have connected the *"upper Input temperature"* as collector
outlet and *"lower Input temperature"* as outlet from storage tank heat
exchanger.

I have set the *deltaTH=10* and *delta TL= 2* as i want that controller
switch keep the pump on between this two limits.



But when u exported the TRNSyS data to excel to check the result it is
noticed that sometimes pump is off even the above mentioned limit (deltaTH=10
and delta TL= 2) is satisfied. I am attaching the excel file and issue is
highlighted in this file (sheet 1). Also TRNSYS file is attached



I will be thanks for the help and the suggestion and to know where I am
wrong.



Reagrds

Adeel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131025/213c5930/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 1.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 103598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131025/213c5930/attachment-0002.xlsx>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project_Controller.tpf
Type: application/octet-stream
Size: 130102 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131025/213c5930/attachment-0004.obj>