[TRNSYS-users] Accumulation stove

[Karol Bandurski]

Dear All,

 

Dou you have some experience with modeling accumulation stove in buildings
using TRNSYS.

 

I think about stove which is driven by electricity or biomass, similar to
titled stove (attachment).

 

I think about two ways to simulate it:

1)      Zone heat gain,

2)      Walls with temperature as boundary condition (temperature of the
stove surface)

 

What do you think about this idea?

 

There is also issue, how can I model the  heat generation in stove to take
into account accumulation and dependence on biomass burning? 

 

Kind regards,

Karol

 

------------------------------------------------

Karol Bandurski MSc.

 <http://www.ee.put.poznan.pl/> Institute of Environmental Engineering

Poznan University of Technology

 <http://www.put.poznan.pl/~karol.bandurski>
www.put.poznan.pl/~karol.bandurski

 <http://www.ee.put.poznan.pl/> www.ee.put.poznan.pl

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131023/cac189d8/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: stove.jpg
Type: image/jpeg
Size: 684254 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131023/cac189d8/attachment-0004.jpg>