[TRNSYS-users] TRNSYS17 and GENOPT

[Gossard, Didier]

Hello Carlo,

Yes, it's possible to use TRNSYS 17 coupling with GenOpt. Can you send all the files you need to run TRNSYS+GenOpt. It may help to resolve your problem.

Best regards,
Didier.


From: Carlo Filippo Bonacina [mailto:carlofilippo.bonacina at polimi.it]
Sent: mardi 26 novembre 2013 09:22
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] TRNSYS17 and GENOPT

Dear all,
is it possible to use Trnsys17 with Genopt?
During the simulation this fatal error appears:
"Fatal Error at time   :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message     48 : The TRNSYS processor has reported that an unrecognized control card was found while trying to read the input file.  This error can be caused by underspecifying a required number of items in the input file.  For example, specifiying only 9 parameters after a "PARAMETERS 10" card has been read can cause this error. The line that caused this error is listed in the reported information below.
    Reported information  : VERSION"
Why?
Otherwise is there an other software for parametric simulations?
How does TRNOPT work?
Thanks a lot.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131126/4f90be17/attachment-0004.htm>