[TRNSYS-users] Type 534 tank nodes.

[David BRADLEY]

Lukas,
   I am nearly certain that the problem is not that there are too many 
nodes in your tank. The issue is likely a bit more subtle. One cause 
could be that you have a large heat exchanger defined in your 
comparatively small tank and that the heat exchanger volume in a 
particular node is larger than the node volume. Another problem could be 
that if you change the number of tank nodes in the parameter list but 
then do not open the plugin and change the number of tank nodes there 
then there will be a mismatch between the data coming from the parameter 
list and the date in the plugin.
   If neither of those is the cause then please send your project and 
your tank *.dat file to your distributor and they can diagnose the problem.
Best,
  David


On 11/7/2013 08:42, Lukas Jasiunas wrote:
> Hello,
>
> has anyone else come across the problem of not being able to increase 
> the number of tank nodes when using a Type 534? I am limited to 2 
> nodes. Once I try to set-up anything else, I get a deck error which 
> states that there is a problem with this exact parameter.. I would 
> appreciate any kind of help or suggestions as I am in need of 
> stratification in this tank. Thank you!
>
> Best regards,
> ME student, Lukas Jasiu-nas.
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131107/14b9d580/attachment-0004.htm>