[TRNSYS-users] TRNSYS-users Digest, Vol 107, Issue 4

[ali javed]

dear all
can any one told me how ETC evacuated tube collector and concentrated power
collectors CPCs are used uder type 1 of solar thermal collectors for the
comparison of Flate plate collector, ETC and CPCs ???


On Sat, Nov 2, 2013 at 10:00 PM, <trnsys-users-request at cae.wisc.edu> wrote:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Re: Trnsys 17 to Trnsys 16 (eva.zacekova at fel.cvut.cz)
>
>
> ---------- Forwarded message ----------
> From: eva.zacekova at fel.cvut.cz
> To: David BRADLEY <d.bradley at tess-inc.com>
> Cc: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>
> Date: Sat, 02 Nov 2013 14:53:32 +0100
> Subject: Re: [TRNSYS-users] Trnsys 17 to Trnsys 16
> David,
>
> thank you for your response.
>
> In my simulation, I use only Type56 (building model), Type155 (call to
> matlab) and Type15 (weather file). The most important for me is to convert
> the building model (Type56), the others are not so crucial.
>
> Thank you very much.
>
> Best,
> Eva
>
> Cituji David BRADLEY <d.bradley at tess-inc.com>:
>
>  Eva,
>>   The simple answer is that there is not a way to run a Trnsys17 model in
>> Trnsys16. However, as is often true with TRNSYS, there might be some ways
>> that you could do it anyway. There are a number of things to consider and I
>> can offer some suggestions if you can give me some more details about your
>> simulation:
>>
>> 1. does it use Type56?
>> 2. are you using any non standard components (such as the TESS Libs,
>> Transsolar components, or components that you wrote) and if so, do you know
>> whether they were written using the Trnsys16 or the Trnsys17 coding
>> standard?
>>
>> Kind regards,
>>  David
>>
>>
>>
>>
>>
>> On 11/1/2013 08:53, eva.zacekova at fel.cvut.cz wrote:
>>
>>>
>>> Dear all,
>>>
>>> some time ago, I used to use Trnsys17 (and created some models in it)
>>> and now, I would like to open and run those models in Trnsys16_1. However,
>>> I am still getting some errors trying to open the models (originally built
>>> in Trnsys17) in Trnsys16_1. Is there any way how to avoid the problems
>>> (maybe saving them in Trn17 version as files compatible with the older
>>> Trn16)?
>>>
>>> Thank you for some hints in advance!
>>>
>>> Best,
>>> Eva
>>>
>>
>> --
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI  53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475
>> d.bradley at tess-inc.com
>>
>> http://www.tess-inc.com
>> http://www.trnsys.com
>>
>
>
> --
>
> Dipl. Ing. Eva Žáčeková
> Czech Technical University in Prague
> Faculty of Electrical Engineering
> Department of Control Engineering
> Prague 2, Karlovo náměstí 13, E-21
> +420 22435 7689
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131102/34311551/attachment-0004.htm>