[TRNSYS-users] TRNEdit Parametric table

[David BRADLEY]

Razaz,
  I would recommend that you send the *.dck (or *.trd) and the *.tbl 
file (located in the same place as your input file) to your TRNSYS 
distributor for assistance.
Kind regards,
  David

On 5/31/2013 05:38, Razaz BASHEIR wrote:
> Hi,
> I am encountring a problem with the parametric table, I am editing the 
> parogram in trnedit by changing the constants as following:
>
>
> CONSTANTS 2
> Acoll=120
> STOP=8760
> *******************************************************************************
> *** Units
> *******************************************************************************
> *** Control cards
> * START, STOP and STEP
> EQUATIONS 2
> START=0
> STEP=0.999999972
>
>
> My aim is to study the effect of changing the collector's area for 
> diffrent times of the year, but when I enter 3 diffrent areas of 
> collectors for 3 diffrent STOP, it runs the table only for one value 
> of STOP and ignore the others, I don't know what should I change?
>
> Thanks,
> Razaz
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130531/0f4423c0/attachment-0004.htm>