[TRNSYS-users] Shadings, walls and windows

[Ewen]

Hy Martin,
I would say that you are right. You need to draw the thickness of the walls on T3D by adding shading surfaces around the window. 

Best,
Ewen Raballand

Le 23 mai 2013 à 15:40, "Martin Schmelas" <Martin.Schmelas at hs-offenburg.de> a écrit :

> Dear TRNSYS users,
> I have a question about shadings, walls and windows.
> I built up a 3D model in TRNSYS3D. For the surface dimensions I used for every wall the centerline. The exterior walls have a lot of windows. I know the thickness of the walls can be defined in TRNBUILD.
> For example the exterior wall has a thickness of 50 cm and the windows are located at the inside dimension, how is the shading from the wall considered?
> Do I have to implement in TRNSYS3D shading groups with the dimension of 50 cm around the windows?
>  
> Thanks
> Martin
>  
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130523/697bb5b8/attachment-0004.htm>