[TRNSYS-users] Simulation Length

[Tom B]

Hello Evan, You can change this in your 'control cards'. In the Simulation studio, you can find a page-like icon called "control cards" on the left of the screen. If you click it, you find the first and second parameter to be the start and stop time of the simulation. Good luck! Tom
 Date: Sat, 4 May 2013 10:43:52 -0400
From: eheber01 at villanova.edu
To: trnsys-users at engr.wisc.edu
Subject: [TRNSYS-users] Simulation Length

Greetings,

This may seem like a pretty simple question, but I am very new to this program. How do I change the simulation length? Its only set for a week and I want to make it a year. 


Thanks in advance,
Evan Hebert
Villanova University
BsEE '13



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130504/a0e07b7f/attachment-0004.htm>