[TRNSYS-users] Using Type 107 with Hot water

carlos.naranjo.mendoza at gmail.com carlos.naranjo.mendoza at gmail.com
Fri May 3 10:13:17 PDT 2013


Hi Rui,

I used the Type 107 whit hot water for a project. If you want to use it for lower temperatures you have to look up on the performance curves of the manufacturers. This data is no easy to get. You have to try to contact them.
Otherwise, you have to estimate these data based on experimental data.
You can look up the site of Yazaki et from the data provided by them you can start to estimate for other values.

Best regards,

Carlos

From: rui.martins at tudor.lu 
Sent: Friday, May 03, 2013 9:19 AM
To: trnsys-users at cae.wisc.edu 
Subject: [TRNSYS-users] Using Type 107 with Hot water

Hello, 
Has anyone used the Chiller Type 107 fired with hot water? 

The user file that comes with it starts at 108°C up, and I would like to use it with lower temperatures. 

Thanks 
Rui Martins
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130503/75eaeaf4/attachment-0004.htm>


More information about the TRNSYS-users mailing list