[TRNSYS-users] Type 335 AHU, problem with air conditioning modes
Markus Gratzl
markus.gratzl at gratzl.co.at
Wed May 15 00:48:11 PDT 2013
Dear TRNSYS users,
I've got a problem with TESS-Type 335: Manual says, that conditioning
modes are selected by comparing T_SA,set and T_mixed (see manual 5.7.1
and 5.7.2). In my modell (see attachement) the comparison seemes to
refer on T_SA,set and T_OA (instead of T_mixed), so that cooling mode is
off when T_OA < T_SA,set. As a result T_SA,set is set as T_mixed (no
cooling) instead of defined T_SUPP from equation (in may modell).
Heating and Cooling Power (Q_ht,HC and Q_cl,CC) refer to T_SUPP like
described in manual, but air temperature from AHU to room (relevant
output value) is wrong I would say.
If conditioning mode ist changed from 2 (cooling) to 3 (heating +
cooling), this problem doesn't appear any longer.
Kind regards,
Markus Gratzl
--
ingenieurbüro gratzl e.u.
markus gratzl-michlmair
dipl.-ing. dr. techn.
ingenieurbüro (beratende ingenieure) für bauphysik
reischau 5 | a-4715 taufkirchen a.d. tr.
tel +43 7733 50281 | mobil +43 664 5131642
markus.gratzl at gratzl.co.at | http://energie.gratzl.co.at/
uid-nr atu 66951845 | FN 380717 d
-------------- next part --------------
A non-text attachment was scrubbed...
Name: AHU.zip
Type: application/zip
Size: 1681948 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130515/41f7b59b/attachment-0001.zip>
More information about the TRNSYS-users
mailing list