[TRNSYS-users] Printing yearly results

[Eirik Ask Straalberg]

Ciaran,

Thanks a lot for your answer, it worked.

Best regards, Eirik


2013/4/30 Flynn Ciaran <ciaran.flynn at aalto.fi>

>  Hei Eirik,****
>
> ** **
>
> To avoid the hassle of using an integrator and a printer, you can use the
> type 46 Printegrator (and modify parameter 4, in your case set it to 8760
> hrs).****
>
> ** **
>
> Regards,****
>
> Ciarán****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* trnsys-users-bounces at cae.wisc.edu [mailto:
> trnsys-users-bounces at cae.wisc.edu] *On Behalf Of *Eirik Ask Straalberg
> *Sent:* 29. huhtikuuta 2013 18:03
> *To:* trnsys-users at cae.wisc.edu
> *Subject:* [TRNSYS-users] Printing yearly results****
>
> ** **
>
> Hi.****
>
> If I simulate many years and want to integrate and print yearly results,
> which module(s) should I use. Have tried Type24 integrator combined with
> Type25b printer and set intervals like -12 (minus for months), but all I
> get Is monthly results.****
>
> Thank you for your help.
>
> Eirik****
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130501/8ff66803/attachment-0001.htm>