[TRNSYS-users] zone energy balance not closing

[Sabine Jansen - BK]

Dear Stefano,



I had this problem (in 2009, with TRNSYS 16) when I used non-symmetrical internal walls. I don't know whether you have non-symmetrical internal walls, but if you have it causes big problems in the energy balance. (BUt maybe this has been solved in TRNSYS 17).



Regards,



Sabine

________________________________

Van: trnsys-users-bounces at cae.wisc.edu [trnsys-users-bounces at cae.wisc.edu] namens Avesani Stefano [stefano.avesani at eurac.edu]
Verzonden: woensdag 26 juni 2013 12:14
To: trnsys-users at cae.wisc.edu
Onderwerp: [TRNSYS-users] zone energy balance not closing

Dear all,
I am facing a problem with the zone energy balance.
I don’t get a closing balance in the zone 5 and 6 (see the attached *.BAL). I have surfed the bui without finding any suspicious settings.
Any experience about this?

Thanks  a lot!
cheers

Stefano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130626/5ffa1694/attachment-0004.htm>