[TRNSYS-users] Asphalt solar collector

Jeff Thornton thornton at tess-inc.com
Mon Jun 3 09:59:48 PDT 2013


 

Ahmed, 

Either Type 997 (Horizontal Ground HX) or Type 1267
(Detailed Ground Coupling) can be used for the modeling of asphalt
collectors. 1267 may be a bit more flexible depending on your layout but
is a also a bit tougher to configure than 997. 

Jeff 

---

Jeff
Thornton 

_President - TESS LLC_ 

_22 N. Carroll Street, Madison WI
USA 53703_ 

_Office: (608) 274-2577 Fax: (608) 278-1475_


_www.tess-inc.com_ 

_E-Mail: thornton at tess-inc.com_ 

On 06/03/2013
4:32 am, Ahmed Khoja wrote: 

> Dear all, 
> 
> I am planing to model an
Asphalt solar collector(basically a number of pipes bared in the
asphalt, acting like a reversed radiant floor ). For this purpose i need
to simulate first the hear distribution in the different pavement
layers,would you recommend the type 997 for this, or are their other
types. more suitable for this propose? Thanks Best, 
> 
> Ahmed Khoja
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130603/81e483ec/attachment-0004.htm>


More information about the TRNSYS-users mailing list