[TRNSYS-users] TRNSYS PID Controller for more than one control signal

[Stefan Zlatev]

Dear All,

I am trying to use a PID controller to provide the heating control signal to several heat pumps depending on a set temperature that I need to deliver to a building. However, the number of heat pumps that would be ON depends on the load. As a result, I believe I need to connect the TRNSYS PID controller to a self designed component, which would provide the conditions, and then to the heat pumps control signal.

I would appreciate your help.

Regards,
Stefan Zlatev 




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130726/d28e2b0e/attachment-0004.htm>