[TRNSYS-users] Error Message 15, then Message 45 in 3D project

[David BRADLEY]

Paula,
   I do not recall what the cause of the earlier problem was. I will, 
however, extend my offer to look at the file and see if I can determine 
the cause. Please send me the *.idf, the *.b17 and the *.tpf (as well as 
anything else I might need in order to run the project.)
Kind regards,
  David


On 7/23/2013 13:00, Paula Claudino wrote:
> I created a 3D model in Sketchup, imported this file into TRNBuild, 
> then used this .idf file in a new 3D building project, created using 
> the wizard. When I try to run this model, I get a Message 15 error, 
> indicating that the equation for IT_W_90_45 is the cause. This is the 
> only error message.
> I found the duplicate version of this equation and deleted it, in the 
> Radiation calculator. When I try running the model again, the new 
> error is Message 48, indicating that IB_W_90_45 is the cause. Any idea 
> what is going on here? I saw that someone else had posted a few months 
> ago about Message 15, in a similar scenario, but the resolution was to 
> send David the file for him to look for the error. Is this error the 
> symptom of a problem with my 3d model? Any help is appreciated.
> Thanks,
> Paula
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130723/44af12c3/attachment-0004.htm>