[TRNSYS-users] Help Type48

David BRADLEY d.bradley at tess-inc.com
Mon Jul 8 13:31:15 PDT 2013


Andrea,
   Without knowing a little more about the system you are trying to 
simulate, it is not really possible to give an answer. If you look in 
the 04-MathematicalReference manual at the descriptions for both Type47 
and 48, you will note that their modes are meant to be set together. In 
other words both must be in mode 0 or both must be in mode 1. If you can 
send some additional information about what kind of system you are 
trying to model, I may be able to offer some more specific advice.
Kind regards,
  David


On 7/8/2013 10:32, Andrea Catalina Alvarado wrote:
> Dear all
>
> I not understand each mode of type 48, which need to connect to the 
> battery type 47, and which are integrated battery.
>
> Thank you very much.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130708/e77cfe38/attachment-0004.htm>


More information about the TRNSYS-users mailing list