[TRNSYS-users] Mechanical versus Natural ventilation

MAIS, Thomas t.mais at bouygues-construction.com
Fri Jul 5 06:00:10 PDT 2013


Thanks Adrien.

But my goal is to cool down an office with natural ventilation while a mechanical ventilation (for the airflow complying with the requirements of regulations) is running.
So if I get your point, it's impossible to evaluate AT THE SAME TIME an airflow from mechanical and natural ventilation... Is it correct ?

See U

De : trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] De la part de ITF - Adrien JEZEQUEL
Envoyé : vendredi 5 juillet 2013 11:56
À : trnsys-users at cae.wisc.edu
Objet : Re: [TRNSYS-users] Mechanical versus Natural ventilation

Dear Thomas,

When you use trnflow, mechanical ventilation defined in ventilation manager in trnbuild are set to 0 and airflows are evaluated with trnflow.
With mechanical ventilation, it's easier to use ventilation manager instead of trnflow.
If you want to use mechanical and natural ventilation, you may use an input called TRNFLOW_ON (for example) and connect it to type 56 :

  *   when mechanical ventilation is used, TRNFLOW_ON = 0 (airflows are calculated with ventilation type manager)
  *   when natural ventilation is necessary, TRNFLOW_ON = 1 (airflows are calculated with trnflow)

Best regards

________________________________
[www.itf.biz]<http://www.itf.biz>
www.itf.biz<http://www.itf.biz>

Adrien JEZEQUEL
Simulations Thermiques Dynamiques

ITF

62, Rue du Bolliet
73230 St Alban Leysse
FRANCE

Phone :
Fax :
Mail:

+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz<mailto:a.jezequel at itf.biz> ou aj at itf.biz<mailto:aj at itf.biz>

Afin de contribuer au respect de l'environnement, merci de n'imprimer cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
Le 05/07/2013 11:33, MAIS, Thomas a écrit :
Hello T-users,

I'm facing an issue using TRNFlow with TRNSYS.
It seems that Natural ventilation applied thanks to TRNFlow makes the mechanical ventilation (apply in the BUILD or in the STUDIO) disappear...

In other words, I think that natural AND mechanical ventilation can't be simulated at the same time.

1.      Am I right ?
2.      Is there any possibilities to "fix" it ?

Thanks a lot !



Thomas Mais
t.mais at bouygues-construction.com<mailto:t.mais at bouygues-construction.com>
Stagiaire Construction Durable







Bouygues Bâtiment
Ouvrages Publics
2, rue Transversale
92635 Gennevilliers Cedex
www.bouygues-batiment-ile-de-france.com









_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at cae.wisc.edu<mailto:TRNSYS-users at cae.wisc.edu>

https://mailman.cae.wisc.edu/listinfo/trnsys-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130705/6c78a6e3/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2583 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130705/6c78a6e3/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 631 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130705/6c78a6e3/attachment-0009.jpg>


More information about the TRNSYS-users mailing list