[TRNSYS-users] Solution to TRNSYS-MATLAB problem

[saleh saadi]

Just to add to the Maarten's advice. 

Don't do that for all Matlab versions you have in your machine. I did this and took me two days of work to discover that the other version was the registered server. TRNSYS was not be able to open MATLAB engine. 
So, 
Do it only for the version that you have the DLL  for  (i.e., TYPE155.DLL). 

regards,
Saleh 




________________________________
 From: Maarten Sourbron <Maarten.Sourbron at mech.kuleuven.be>
To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu> 
Sent: Monday, January 16, 2012 8:59 AM
Subject: [TRNSYS-users] Solution to TRNSYS-MATLAB problem
 

 
Hi all,
 
It took us quit a while to figure out why the
TRNSYS-MATLAB coupling did not work at some machines, while it did on others.
After trying and comparing all possible options,
recompiling the type155-dll, … the following appears to be the problem:
 
Matlab has to be registered as a COM server.  Simply
run the following command in Matlab:
 
regmatlabserver
 
And it works on all machines…
Hopefully this helps to save time J
 
Kind regards,
Maarten
 
---
PhD student
Simulation of Thermal Systems Research group
Departement Werktuigkunde-Department of Mechanical Engineering 
Katholieke Universiteit Leuven
Celestijnenlaan 300A bus 2421
3001 Heverlee (Leuven)
T : 0032 (0)16 32 28 73
F : 0032 (0)16 32 29 85
E : Maarten.Sourbron at mech.kuleuven.be
 
 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130129/2aaae56b/attachment-0005.htm>