[TRNSYS-users] component development Fortran compiler

Marcus jones.0bj3 at gmail.com
Thu Jan 24 03:29:48 PST 2013


Hello Florian, and all who are looking to compile or debug in Fortran;

As I previously reported, I had success with the old Compaq Fortran 6.6 in
Windows 8 in building and compiling types, but I was unable to get it into
Debug mode.

However, I then discovered that intel has a 30 day eval copy for their
compiler;
http://software.intel.com/en-us/intel-visual-fortran-composer-xe-evaluation

Works great!

Not sure what to do when it expires :(

Have fun,

Marcus
-- 
Marcus Jones,  M.Sc., LEED®AP BD+C
*Freelance energy consultant*
*Vienna, Austria*



On Tue, Jan 22, 2013 at 7:39 PM, jeannieboef <jeannieboef at gmail.com> wrote:

> My experience with trying g95 is that although one can successfully
> compile and the model may appear to work, you may still be getting bad
> results. You'll have to modify almost all the auxillary modules like the
> data.f90 constants.f90 functions.f90 etc., before recompiling your dll.
> Although I solved many hassels,  g95 did not support the 'decoration' of
> certain variable s the same way that intel compiler does. In the end I gave
> up on a work around. If your model is quite basic, this may not be an issue.
> Regards,
> Jean
>
> Sent from my iPhone
>
> On 22.01.2013, at 18:10, David BRADLEY <d.bradley at tess-inc.com> wrote:
>
> Florian,
>   While I don't have any personal experience with it, some users have had
> success writing new Types using the free G95 compiler. There are some hints
> and tips at:
>
> <http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/tutex17.htm>
> http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/tutex17.htm
>
> best,
>  David
>
>
> On 1/22/2013 03:57, Florian Limmer wrote:
>
> Dear TRNSYS users,
>
>  at the moment i am developing a new component for use with TRNSYS
> Simulation Studio.
>
>  I have Microsoft Visual Studio but i do need a Fortran compiler. I
> wondered if someone here may have already created a component? I cant pay
> for the compiler so i would prefer freeware. Does anyone have any
> suggestions?
>
>  I would appreciate an answer of yours.
> Thanks a lot.
>
>  Flo Limmer
>
>
> _______________________________________________
> TRNSYS-users mailing list <TRNSYS-users at cae.wisc.edu>TRNSYS-users at cae.wisc.edu <https://mailman.cae.wisc.edu/listinfo/trnsys-users>https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475 <d.bradley at tess-inc.com>d.bradley at tess-inc.com
>  <http://www.tess-inc.com>http://www.tess-inc.com <http://www.trnsys.com>http://www.trnsys.com
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130124/d3f9b01e/attachment-0005.htm>


More information about the TRNSYS-users mailing list