[TRNSYS-users] Type60 tank problem

Brian Raichle brian.raichle at gmail.com
Sun Feb 17 20:25:51 PST 2013


Hello,
I'm using a Type60c tank in a simple direct solar water heating model. I
get the "negative flow" error. The input/outputs are defined as:
inlet 1 flow: mains flow             outlet 1 flow: -2
inlet 2 flow: solar pump flow      outlet 2 flow: solar pump flow
Not sure where else to look.  Any thoughts?
Thanks,
Brian

-- 
Brian Raichle
Department of Technology and Environmental Design
Appalachian State University
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130217/15c4287a/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tank2.tpf
Type: application/octet-stream
Size: 189917 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130217/15c4287a/attachment-0005.obj>


More information about the TRNSYS-users mailing list