[TRNSYS-users] component development Fortran compiler

Florian Limmer flo.limmer at googlemail.com
Fri Feb 1 04:20:20 PST 2013


hi again,

thanks for your advice with the g95 compiler i just tried compiling.
in the how to .doc it says there would be a Typexxx.dll file. but aparently
i cant find it so something must have went wrong... can u tell me what to
do or how to find out my mistake?

thanks
flo


2013/1/24 Marcus <jones.0bj3 at gmail.com>

> Hello Florian, and all who are looking to compile or debug in Fortran;
>
> As I previously reported, I had success with the old Compaq Fortran 6.6 in
> Windows 8 in building and compiling types, but I was unable to get it into
> Debug mode.
>
> However, I then discovered that intel has a 30 day eval copy for their
> compiler;
> http://software.intel.com/en-us/intel-visual-fortran-composer-xe-evaluation
>
> Works great!
>
> Not sure what to do when it expires :(
>
> Have fun,
>
> Marcus
> --
> Marcus Jones,  M.Sc., LEED®AP BD+C
> *Freelance energy consultant*
> *Vienna, Austria*
>
>
>
>
> On Tue, Jan 22, 2013 at 7:39 PM, jeannieboef <jeannieboef at gmail.com>wrote:
>
>> My experience with trying g95 is that although one can successfully
>> compile and the model may appear to work, you may still be getting bad
>> results. You'll have to modify almost all the auxillary modules like the
>> data.f90 constants.f90 functions.f90 etc., before recompiling your dll.
>> Although I solved many hassels,  g95 did not support the 'decoration' of
>> certain variable s the same way that intel compiler does. In the end I gave
>> up on a work around. If your model is quite basic, this may not be an issue.
>> Regards,
>> Jean
>>
>> Sent from my iPhone
>>
>> On 22.01.2013, at 18:10, David BRADLEY <d.bradley at tess-inc.com> wrote:
>>
>> Florian,
>>   While I don't have any personal experience with it, some users have had
>> success writing new Types using the free G95 compiler. There are some hints
>> and tips at:
>>
>> <http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/tutex17.htm>
>> http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/tutex17.htm
>>
>> best,
>>  David
>>
>>
>> On 1/22/2013 03:57, Florian Limmer wrote:
>>
>> Dear TRNSYS users,
>>
>>  at the moment i am developing a new component for use with TRNSYS
>> Simulation Studio.
>>
>>  I have Microsoft Visual Studio but i do need a Fortran compiler. I
>> wondered if someone here may have already created a component? I cant pay
>> for the compiler so i would prefer freeware. Does anyone have any
>> suggestions?
>>
>>  I would appreciate an answer of yours.
>> Thanks a lot.
>>
>>  Flo Limmer
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list <TRNSYS-users at cae.wisc.edu>TRNSYS-users at cae.wisc.edu <https://mailman.cae.wisc.edu/listinfo/trnsys-users>https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>> --
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI  53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475 <d.bradley at tess-inc.com>d.bradley at tess-inc.com
>>  <http://www.tess-inc.com>http://www.tess-inc.com <http://www.trnsys.com>http://www.trnsys.com
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130201/ef9c21d5/attachment-0005.htm>


More information about the TRNSYS-users mailing list