[TRNSYS-users] [Governing equation for Multizone modeling by type 56]

David BRADLEY d.bradley at tess-inc.com
Thu Dec 19 07:33:32 PST 2013


it is stored in the same location as the *.b17 file. However, it can 
also be accessed from TRNBuild. Click the icon fourth from the right 
along the top (the icon looks like piece of paper with "INF" written on 
it. You can also select "open INF file" from the "generate" menu.
Kind regards,
  David



On 12/19/2013 08:56, debora antonellis wrote:
> where is the inf.file for look the errors?
> thanks
>
> ------------------------------------------------------------------------
> Date: Fri, 13 Dec 2013 09:16:11 -0600
> From: d.bradley at tess-inc.com
> To: trnsys-users at cae.wisc.edu; singh.jatin1319 at gmail.com
> Subject: Re: [TRNSYS-users] [Governing equation for Multizone modeling 
> by type 56]
>
> Jatin,
>   The mathematical relationships and algorithms of Type56 are far too 
> complex to be described in an email. Section 5.4 of the 
> 05-MultizoneBuilding manual begins the relevant information in the 
> documentation. It sounds as though you have already found this. If you 
> need more information than what is available in the documentation, I 
> would recommend that you look up some of the references.
>
>   As far as air flow and ventilation are concerned, Type56 itself does 
> not compute interzonal air flow rates. This is typically done by 
> coupling Type56 with either TRNFlow (an implementation of COMIS) or 
> Type97 (an implementation of CONTAM). If you do not use the coupled 
> approach then Type56 allows you to specify both ventilation flows are 
> interzonal flows and it accounts for these known flow rates in its 
> zonal energy balances.
> Regards,
>  David
>
>
> On 12/13/2013 01:27, Jatin Singh wrote:
>
>     Hi everyone, I have been working with TRNSYS multizone model and
>     am unable to figure from manuals the description about governing
>     equations used to solve.
>
>     What are the governing equation it uses and from what I understand
>     it uses sort of lumped analysis then how it models air flow and
>     ventilation.
>
>     -- 
>     Regards,
>
>     Jatin Kumar Singh.
>     5th year Dual Degree Student
>     Thermal Science & Engineering
>     Mechanical Engineering Department
>     IIT Kharagpur.
>     Mobile:+919735731235
>
>
>
>
>
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at cae.wisc.edu  <mailto:TRNSYS-users at cae.wisc.edu>
>     https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
> _______________________________________________ TRNSYS-users mailing 
> list TRNSYS-users at cae.wisc.edu 
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131219/7a86b1bd/attachment-0004.htm>


More information about the TRNSYS-users mailing list