[TRNSYS-users] (no subject)

[Mehdi]

Hi 
I recommend type 56.
You can simply make it in sketch up and transfer it to the trnsys. After making the building you can think about the chiller.
Hope it helps
Mehdi



> On 12 Dec 2013, at 07:09, ali javed <engr.alijaved13 at gmail.com> wrote:
> 
> dear
> 
> i want to calculate the cooling load of a simple class room having 4 walls and flat roof on it which type of building (type 12, 8,19, 56) i have to use in trnsys when at the end i want to connect this with absorption chiller
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131212/b2188b5d/attachment-0004.htm>