[TRNSYS-users] definition of ceiling/floor with TRNBuild

[Mohamed Alhamahmy]

Fedrico,

Zones are created without roofs/ceilings as a default. You have to add them yourself.

Right click the zone in TRNBUILD. You should see the Airnode window open up with a list of all the walls. Here you can add walls, change wall parameters, and assign pretty much all the details of your zone.

This is detailed in Chapter 6 of the documentation. "Multizonebuilding.pdf'

Regards,

Mohamed Al-Hamahmy.
Research Engineer.

[cid:image001.jpg at 01CEF686.E9669DB0]
PO Box 54224, Abu Dhabi,
United Arab Emirates
Office   +971 2 810 9151
Email    malhamahmy at masdar.ac.ae<mailto:malhamahmy at masdar.ac.ae>
http://www.masdar.ac.ae<http://www.masdar.ac.ae/>
P Please consider the environment before printing this email
This transmission is confidential and intended solely for the person or organization to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify us immediately by e-mail at info at masdar.ac.ae<mailto:info at masdar.ac.ae>

From: trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of -- Fed --
Sent: Wednesday, December 11, 2013 3:26 PM
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] definition of ceiling/floor with TRNBuild

Hi everyone,
I am a new user of TRNSYS and I am already facing some problems.
First of all, I define a multizone building through the wizard (I mean from SimulationStudio File\New\BuildingProject(multizone), follow all the steps and in the end I get my TRNSYS file.
Assuming i make a very simple one-zone building, I open Type56 with "EditBuilding" i see the surfaces: 4 external walls for N, S, W and E and one for the ground (type BOUNDARY).

My question is, WHERE IS THE CEILING? how can i modify it?

Thanks

Federico
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131211/0353fca0/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5411 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131211/0353fca0/attachment-0004.jpg>