[TRNSYS-users] Problem with type 56 and parametric runs

[Richard Thygesen]

Hello again.
I have almost solved the problem. If I copy the building file and  add a 1,2,3 and so on in the end of the file name the Parametric run works.
But I would like to find a better solution. Any suggestions?

Best regards
Richard Thygesen
Doctoral student

Mälardalen University
School of Business, Society & Engineering
Phone: +46(0)21-10 31 82
richard.thygesen at mdh.se<mailto:richard.thygesen at mdh.se>
www.mdh.se<http://www.mdh.se/>

[cid:image001.jpg at 01CE9379.459372A0]

Från: Richard Thygesen
Skickat: den 7 augusti 2013 13:17
Till: trnsys-users at cae.wisc.edu
Ämne: [TRNSYS-users] Problem with type 56 and parametric runs

Hi.
I have a problem with using parametric runs.
When i try running a Trnbuild screen appears that states that I have to add at least one output. I am not changing any parameter in type56 with the run.
Have anyone had this problem before and how do I solve it?

Best regards
Richard Thygesen
[cid:image002.png at 01CE9379.459372A0]





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130807/ee8638ee/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2447 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130807/ee8638ee/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 164112 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130807/ee8638ee/attachment-0004.png>