[TRNSYS-users] TRNSYS-users Digest, Vol 93, Issue 36

[Robert Burzynski]

Hi

Is it possible to somehow transfer models of buildings from IES VE project
to TRNSYS
or how to connect heat demands generated by IES to TRNSYS as heat loads.
Kind regards,

Robert Burzynski
Research Engineer
Zero Carbon House Project - Technologies for Sustainable Built Environments
(TSBE)
University of Reading (UoR) in collaboration with Scottish and Southern
Energy (SSE)
E1. rbt.burzynski at gmail.com
E2. r.burzynski at pgr.reading.ac.uk.
W www.reading.ac.uk/tsbe/
W www.ssezerocarbonhomes.com
M. 07928281876



On 25 September 2012 15:26, <trnsys-users-request at cae.wisc.edu> wrote:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Debugging TRNSYS using Microsoft Visual Studio 2010
>       (Farah, Sleiman - farsy019)
>    2.  equation length limit (Jean Marais)
>    3. mismatch between type 30a and type99 (Santeri Siren)
>
>
> ---------- Forwarded message ----------
> From: "Farah, Sleiman - farsy019" <sleiman.farah at mymail.unisa.edu.au>
> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Tue, 25 Sep 2012 09:06:23 +0000
> Subject: [TRNSYS-users] Debugging TRNSYS using Microsoft Visual Studio 2010
>
> Dear all,****
>
> ** **
>
> I created a component (type165) in TRNSYS 16 under windows 7 using
> Microsoft Visual Studio 2010. This component (solar collector) is connected
> to a weather data reader, pump, and hot water storage tank. In the
> simulation studio, the simulation stalls at a specific time without any
> error message. I believe that the simulation is not able to converge at
> that time which is making TRNSYS irresponsive. I have been trying to debug
> the component, however an error message {Unable to start program
> ‘C:\Program Files\Trnsys16\UserLib\ReleaseDLLs\Type165Lib.dll’} keeps
> popping up in Microsoft Visual Studio as soon as F5 (debug) is clicked. The
> file (Type165Lib.dll) do exist in that directory.****
>
> ** **
>
> Any suggestion how to make the debugging possible is highly appreciated.**
> **
>
> ** **
>
> Regards,****
>
> ** **
>
> Sleiman****
>
>
> ---------- Forwarded message ----------
> From: Jean Marais <jeannieboef at gmail.com>
> To: David BRADLEY <d.bradley at tess-inc.com>, TRNSYS-users at cae.wisc.edu
> Cc:
> Date: Tue, 25 Sep 2012 14:59:53 +0200
> Subject: [TRNSYS-users] equation length limit
> Dear Group,
> What is the limit on the length of an equation? eg. a = b + c + d + ... +
> xxx
> Is it limited to "string length" or number of terms or what?
> Regards,
> Jean
>
>
> ---------- Forwarded message ----------
> From: Santeri Siren <santeri.siren1 at gmail.com>
> To: "trnsys käyttäjät" <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Tue, 25 Sep 2012 17:25:57 +0300
> Subject: [TRNSYS-users] mismatch between type 30a and type99
> Hello all,
>
> I am trying to use type 30a to model collector array shading on my PV
> panel rows. I ran some test simulations and there seems to be a mismatch
> between type 30a and weather data file in the total radiation that reaches
> the surface.
>
> I set the following parameters to type 30 and to type 99 (weather data):
>
> - slope of surface = 45
> - azimuth angle of surface = 0
>
> also in type 30:
>
> -slope of field = 0
>
> Then I set the row separation in type 30 to value 100 m. (there should be
> no shading between PV arrays)
>
> When I log the total radiation on surface from type 30 and type 99 there
> is a mismatch. The radiation level of type 30 is always a little lower than
> in the type 99. Does anyone know how this is possible? have I possibly made
> wrong connections?
>
> Best regards. Santeri Siren
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120925/98d90995/attachment-0005.htm>