[TRNSYS-users] Partial (one month) weather data, 10min interval

David BRADLEY d.bradley at tess-inc.com
Fri Sep 14 08:25:58 PDT 2012


Michal,
   This sounds like a bug that we have found and fixed in Trnsys17. We 
are in the final testing stages of the fix; could you please send me the 
project and the data file so that I can have a look?

   A couple of hints (although I do not think that these will solve the 
problem...):
- make sure that you set the "start day" parameter of Type16 correctly 
(it should be 152 for June 1).
- make sure that you set the simulation start time to 3624.
- your first method of specifying the timestep is the correct one. Set 
the simulation time step to a STRING variable called TIMESTEP and define 
the equation that you wrote below:

EQUATIONS 1
TIMESTEP = 1/6

Best,
  David




On 9/14/2012 09:49, Michał Klimas wrote:
>
> Dear ALL !,
>
> I got weather data from measurements (total radiation on horizontal) 
> with the 10 min interval for ONLY one month (June).  I was using type 
> 9e (10 min interval, mode 3) to read the data and type 16a for 
> radiation processing.
>
> When I set  “simulation time step” in Control Cards to a string 
> “TIMESTEP” and tried different values in EQUATIONS:
>
> -TIMESTEP=1/6 (10 minutes) – I got an error in type 16, that “The 
> simulation time is outside the data reading interval…”
>
> -TIMESTEP=0.125 (7.5 min - default) - results were wrong but the 
> simulation went ok.
>
> Connections “Time of last read” and “Time of next data read” are set 
> properly, according to the provided example.
>
> What would be the best to properly set this simulations ?
>
> Is this an issue with the type 16, which takes one hour (only ?) 
> intervals and interpolates to required interval given by user ?
>
> I would be grateful if someone could point out any solution.
>
> Kind regards
>
> Michal Klimas
>
> Poznan University of Technology
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120914/abcc4201/attachment-0005.htm>


More information about the TRNSYS-users mailing list