[TRNSYS-users] Printegrator Question

[David BRADLEY]

Jean,
   If you are seeing a row of asterisks like that, it is usually that 
you are trying to use a formatted write statement and that you haven't 
provided enough space to write the number. For example, if you try and 
write the number 10000.0 and you use the Fortran format code F2.1, the 
number cannot be written in the space provided so you end up with *** 
instead.
Kind regards,
  David



On 9/10/2012 10:59, Jean Marais wrote:
> I'm having a printegrator problem where the summed result does not appear:
>
>     Sum (note: sums are set to zero for inputs that were not integrated.)
>     Label not available
>                Total********
>
> What's going on here? My simulation does not reach convergence at 
> every timestep...is this the issue?
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120910/ec43f82c/attachment-0005.htm>