[TRNSYS-users] coupling Excel

[leen peeters]

Louis,

I dd recently post a question about it. The way I solved it is to call
excell multiple times. Of course you can only do that when a given amount
of your excell calculations is to be excecuted sequentially ...
But it works fine now with 3 times calling excell where the output of one
can be used as input for the next one...

Leen

On Fri, Sep 7, 2012 at 8:42 AM, STEPHAN Louis 231500
<Louis.STEPHAN at cea.fr>wrote:

>  Dear All,****
>
> ** **
>
> I am writing to ask about a problem when coupling Excel to TRNSYS, in fact
> if the number of Input is <= 8, everything works fine but for 9 or 10
> Inputs excel is executed however it seems like the calculations inside
> Excel are not done because the reported variable doesn’t change. I have
> seen in the forum that a question about this problem was already asked but
> I didn’t find an answer. Anyone have an idea about this problem?****
>
> ** **
>
> Best regards, ****
>
> ** **
>
> Louis Stephan****
>
> Ingénieur Chercheur / Docteur****
>
>
> ----------------------------------------------------------------------------
> ****
>
> Laboratoire d'Energétique du Bâtiment (LEB)****
>
> INES / CEA ****
>
> Recherche, Développement, Innovation Industrielle****
>
> 50, avenue du Lac Leman****
>
> 73377 LE BOURGET DU LAC, France****
>
> Tel: +33 (4) 79 60 19 42****
>
> ** **
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120907/346f30ab/attachment-0005.htm>