[TRNSYS-users] Validation of a solar thermal system

[Zhe Li]

Dear Users,

 

I am trying to validate a solar thermal system by comparing a measured data
with modelled data obtained from TRNSYS simulation. However, I have found
the percentage difference is huge. I have double checked all parameters
which are the same as the real system. I am wondering if anybody has done
any similar validation before? Would be possible if you could share your
experience with me? The validation is critical for my study, which prove the
accuracy of the software package also the modelling system set up.  

 

Thank you very much in advance.

 

Zhe Li



Tá an teachtaireacht seo scanta ó thaobh ábhar agus víreas ag Seirbhís Scanta Ríomhphost de chuid Seirbhísí Faisnéise, ITBÁC agus meastar í a bheith slán.  http://www.dit.ie

This message has been scanned for content and viruses by the DIT Information Services E-Mail Scanning Service, and is believed to be clean. http://www.dit.ie

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120904/ad954da8/attachment-0005.htm>