[TRNSYS-users] Glazed air collector

[Nidal Abdalla]

Dear Matt
 
Thank you v.much for your reply.
 
Nidal Abdalla

   

________________________________
 From: Matt Duffy <duffy at tess-inc.com>
To: Nidal Abdalla <nidalabdalla at yahoo.com> 
Cc: trnsys-users at cae.wisc.edu 
Sent: Friday, October 26, 2012 7:26 PM
Subject: Re: [TRNSYS-users] Glazed air collector
  

 
Dear Nidal Abdalla, 
  
I have used Type539 (Glazed Flat Plate Solar Collector from TESS Solar Library) with success for a solar air collector. Since the solar air collector was here in the states, they had the SRCC rating numbers for the efficiency and IAM's, so I could simply enter those numbers into the parameters of Type539.  Since this solar collector model and many others in TRNSYS assume a constant fluid specific heat, you can implement solar air heating simulations with them. 
  
Best regards, 
  
Matt Duffy 
  
On 2012-10-16 16:15, Nidal Abdalla wrote: 
Dear all 
>
>I am trying to simulate glazed air collector for space heating using TRNSYS 17 with TESS libraries. Anyone can recommend the best choice for collector type can be used? I found at the TRNSY archives 2010 that  Mr. David had mentioned that there are a number of air-based solar collectors available in the TESS Solar Component. In fact, I found only unglazed air collector in the TESS lib. I am wondering if someone can help me. 
>  
>Regards 
>
>Nidal Abdalla 
>
>National Energy Research Center 
>Amman - Jordan  
>
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121026/1feca505/attachment-0005.htm>