[TRNSYS-users] Type 19

[David BRADLEY]

Sherry,
   Yes, you can have multiple instances of Type19 in the same 
simulation. I would highly recommend starting from the example that uses 
Type19 (a single instance). After making sure that the example runs, 
modify it one small step at a time so that it models one of your three 
zones. Once you have gotten that to run then add another instance of 
Type9 to model a second zone, then a third.
Kind regards,
  David


On 10/25/2012 04:17, 1001_sherry at tongji.edu.cn wrote:
> Dear Sirs,
> Can TRNSYS run several Type 19 components in one project ?
> I try to build a warehouse system with 3 zones in TRNSYS, but for some reasons ,i don't want to use Type 56 .So I use 3 Type 19 components . When I run the simulation , there are errors .
> TRNSYS Message    103 : The TRNSYS TYPE checking routine has found
>> an inconsistency in the specified component between the input file and
>> the information expected by the Type
>>   Reported information  : An illegal number of INPUTS has been
>> specified for this component. Please check the component
>> configuration. 18 INPUTS are required and 15 were specified.
> Thank you !
> Best Regards,
> Sherry
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com