[TRNSYS-users] Question about the adjacent zone ventilation

[Moises Odriozola Maritorena]

Dear Yao,

for Trnsys 16 there is a example in  
"\Trnsys17\Examples\Calling_Contam" folder, this example is defined  
for natural ventilation and it's composed by two zones. There is air  
transfer between this two zones.

For Trnsys 17 there is an additional example in the same folder. This  
example defines the same case but with a mechanical ventilation system.
Best regards,

Moises Odriozola
University of Basque Country

Yao Lu <lxyl-y at 163.com> escribió:

> Dear all,
> I am a beginner of TRNSYS. I met a problem about the adjacent zone  
> ventilation.
> In detail, I want to do the thermal simulation of two zones, which  
> are adjacent to each other by a wall with window. The ventilation  
> for one zone is directly from outside, but for another zone is from  
> the adjacent zone (, which means that the temperature of the air  
> flow is depended on the air temperature of the adjacent zone ).
> My question is how to set up this kind of ventilation type that get  
> air flow from anther zone but not outside (in both TRNBuild and  
> Simulation Studio)?
> Thank you so much for your kindness in advance!
> Your answer will be very important for me!
> Best regards,
> Yao
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>