[TRNSYS-users] CPU-Usage while simulate

Yi Zhang YiZhang at dmu.ac.uk
Mon Oct 29 18:43:24 PDT 2012


If you have a dual or multiple core processor, TRNSYS simulation may use only one of the cores. If you are concerned about simulation speed because you are trying to run multiple simulations, try jEPlus (http://www.iesd.dmu.ac.uk/~jeplus/ <http://www.iesd.dmu.ac.uk/~jeplus/> ).
 
Dr Yi Zhang
IESD, De Montfort University, United Kingdom

________________________________

From: trnsys-users-bounces at cae.wisc.edu on behalf of Schranzhofer, Hermann
Sent: Mon 29/10/2012 22:08
To: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] CPU-Usage while simulate


Hi Sascha,

I don't know if this helps but if you start your Simulation in the command Shell (cmd) with the command "start" you can give a priority (see also "help start" in cmd). If you use High ist will speed up your simulation, but be aware that you cannot use your system until your simulation is finished.

Regards,
Hermann

Von meinem iPad gesendet

Am 29.10.2012 um 20:49 schrieb "Heinze" <heinze at ingweber.de>:



	Dear Trnsys-Users, 

	 

	i´ve seen that my CPU-Usage is just 50 % while running a simulation. Is there a possibility to let Trnsys use 100 % of CPU so that the simulation runs faster ? 

	Or does the CPU-Usage have no effect on the simulation speed ?

	 

	 

	Best regards

	 

	Sascha Heinze

	 

	_______________________________________________
	TRNSYS-users mailing list
	TRNSYS-users at cae.wisc.edu
	https://mailman.cae.wisc.edu/listinfo/trnsys-users
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121030/457582f8/attachment-0001.htm>


More information about the TRNSYS-users mailing list