[TRNSYS-users] Convergence error for my project

[Patrick Fabriek]

Dear TRNSYS users,

I developed a house with a heat pump connected to an active layer (floor heating in the house) and a domestic storage tank which the heat pump heats up every 24 till 60 degrees.

The model works, but there are convergence errors every now and then.  It has to do with how I switch off and on the pumps. As TRNSYS tells me that the mass flow balance is incorrect.  To me it looks like some control  issue.

My model is in the attachments, can anyone be so kind and give me some pointers how I can get rid of these errors.

Kind regards,

Patrick Fabriek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121120/70cb5d7e/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ModelF.zip
Type: application/x-zip-compressed
Size: 311548 bytes
Desc: ModelF.zip
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121120/70cb5d7e/attachment-0005.bin>