[TRNSYS-users] CCISHADE

[Marion Hiller]

Karol,

 

if 45 % of the absorbed radiation on the internal shading is transferred
directly as a convective gain to the airnode

 

you need to enter 0.45 [%/100].

 

Best regards,

 

Marion 

 

Dipl.-Ing. Marion Hiller 
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäude 
Munich - New York - Stuttgart + 49.711.67976.0 

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 

 

 

  _____  

Von: Karol Bandurski [mailto:karol.bandurski at put.poznan.pl] 
Gesendet: Mittwoch, 14. November 2012 16:59
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] CCISHADE

 

Dear All,

 

It is possible to define CCISHADE in TRNBuild in Windows Manager.

 

But I don’t understand the units of this value.

 

What does it mean [%/100]???

 

If typical value is about 0.45 (between 0.3 and 0.6) it is mean that, it
is:

45 % or 0.45%?

 

What should be written: 0.45 [%/100] or 45[%/100] in manager?

 

Regards,

Karol

------------------------------------------------

Karol Bandurski MSc.

Institute of Environmental Engineering

Poznan University of Technology

www.ee.put.poznan.pl

www.put.poznan.pl

 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121115/24167470/attachment-0005.htm>