[TRNSYS-users] Pump with multiple controller input signals

Patrick Fabriek P.H.Fabriek at tudelft.nl
Tue Nov 13 09:23:42 PST 2012


Dear TRNSYS users,


I am modelling  a floor heating system in of a house in combination with a heat pump. The heat pump is not only heating the floor but also a water storage tank. The system works as follows:

The storage tank gets heated up once every 24h till 60 degrees, when this happens the floor heating is getting bypassed.
 There is one pump that I am trying to get controlled by both systems : when the room temperature become too low, controlled with a simple thermostat, signal turn 1 and another controller where the signal is  1 at midnight for couple of hours to heat up the storage tank.

So I would like to have for example a  OR-function  to the control the pump. Is there something like that?

Kind Regards,
Patrick Fabriek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121113/659ec92b/attachment-0005.htm>


More information about the TRNSYS-users mailing list