[TRNSYS-users] how can I model floor heating and radiators

David BRADLEY d.bradley at tess-inc.com
Fri Nov 9 08:35:37 PST 2012


Karol,
   I would use the active layer in Type56 to model the radiant floor 
option. Type1231 is intended to model low-temperature hydronic 
heat-distributing units such as radiators, convectors, and baseboard and 
finned-tube units. There is guidance in the documentation on how to 
choose values of the parameters. While your radiator doesn't have tubes 
exactly, I would treat the vertical flow channels as pipes and use an 
approximate diameter (or more ideally, the hydraulic diameter of the 
flow channel)
Kind regards,
  David


On 11/8/2012 12:08, Karol Bandurski wrote:
>
> Dear all,
>
> I would like to compare energy demand for dwelling with floor heating 
> vs. with radiators.
>
> So I have following issue:
>
> 1)FLOOR/RADIANT HEATING: what is the best (easy and accurate) way to 
> model this installation (in context of my goal), which solution is better:
>
> a.Active Layer in TRNBuild,
>
> b.Type 1231,
>
> c. Other type...
>
> 2)RADIATORS: I would like to use type 1231 to simulate radiators  - it 
> is good way? The problem is that construction of my radiators is as 
> you can see in attachments.
>
> How to find required values to define model of radiators? e.g. What is 
> 'Inside diameter of the pipe in the unit' if in my radiators there is 
> no pipe inside, they are only connected to pipe... (attachments)
>
> I will be grateful for any trick and hints!
>
> Regards!
>
> Karol
>
> -----------------------------------------
>
> mgr inz.. Karol Bandurski
>
> Instytut Inz.ynierii S'rodowiska
>
> Politechnika Poznan'ska
>
> www.ee.put.poznan.pl
>
> www.put.poznan.pl
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121109/9f6d56d2/attachment-0005.htm>


More information about the TRNSYS-users mailing list