[TRNSYS-users] The Error Message 105 TRNSYS.16.00
hassan bouhess
hassan.bouhess at gmail.com
Sat Nov 24 03:14:35 PST 2012
Hello Mr David,
when i try to simulate again and again the Type.460, There is only one fatal
error :
** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from
TRNDll.dll: Type9, Type25
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSApplicationsLibrary_ReleaseVersion201.dll"
was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSControlsLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGHPLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message :
"TESSGreenBuildingLibrary_ReleaseVersion201.dll" was found but did not
contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message :
"TESSGroundCouplingLibrary_ReleaseVersion201.dll" was found but did not
contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHVACLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSHydronicsLibrary_ReleaseVersion201.dll"
was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message :
"TESSLoadsAndStructuresLibrary_ReleaseVersion201.dll" was found but did not
contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSOptimizationLibrary_ReleaseVersion201.dll"
was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSSolarLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSUtilityLibrary_ReleaseVersion201.dll" was
found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the
UserLib directory. (Note: Only DLL's including Types that are used in the
simulation are loaded)
Reported information : 0 user DLLs were loaded after searching in
"D:\TRNSYS16\UserLib"
*** Fatal Error at time : 0.000000
Generated by Unit : 4
Generated by Type : 460
TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but
was either not linked into trndll.dll or was not found in an external dll.
A dummy subroutine was called in its place. Please link the TYPE or remove
it from the input file
Reported information : Not available
*** Simulation stopped with errors
Total Notices : 14
Total Warnings : 0
Total Fatal Errors : 1
Mainly the error 105, I can't identify where the problem is coming from, i
try to find what means in the TRNSYS forum but with any idea !! I put my
type.460.dll in "D:\Trnsys16\UserLib\ReleaseDLLs directory.
I take all of the files with the extension *.dll from the
..\Trnsys16\UserLib directory and i put them into either
..\Trnsys16\UserLib\ReleaseDLLs\ or ..\Trnsys16\UserLib\DebugDLLs\
to avoid doubt.
Did i miss Something?
What i´m doing wrong?
Thanks in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121124/6b269d7c/attachment-0001.htm>
More information about the TRNSYS-users
mailing list