[TRNSYS-users] Straight Duct

[Aleksandra Kaczmarek]

Dear all,

I have a question about straight duct. Which height I have to enter on the
extrenal side of the building. To the end of the duct (exit of duct -A) or
to the same place where determines the height in the room ( beginning of
duct-B) .
[image: Obraz w treści 2]
In situation A , when I choose outputs for straight duct and I save the
file this shows up :
[image: Obraz w treści 1]
and information in *inf file:

COMIS MESSAGE  ***** NOTE *****
 &-NET-LINks:  LinkID=L153  Type=DS_001  FROM(zone MIESZKAA)=3.13  m
 TO(zone
 EN_005)=14.6m  deltaH=11.47m.  ZoneHeight+LinkHeight is different for sides
 FROM & TO, like a vertical shaft.  Is this OK ?

Thanks for any help.

Ola Kaczmarek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121119/2b1f157d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 23376 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121119/2b1f157d/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 9363 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121119/2b1f157d/attachment-0003.png>