[TRNSYS-users] Probleme with type.460 : Earth to air heat exchanger ( EAHX)

[David BRADLEY]

Dear Mr. Hassan,
   Is the Type460 that you are using part of the TRNDll or is it 
compiled in an external DLL? If you don't know then check your 
..\Trnsys16\UserLib\DebugDLLS\ and ..\Trnsys16\UserLib\ReleaseDLLS\ 
directory for something called ***460***.dll. If I were to guess, I 
think that Type460 is compiled into a very old version of the Trnsys16 
TRNDll, one that does not recognize the keyword "TIME_REPORT." I cannot 
be certain though. If that were true, I would think that you would not 
be able to run any input files. To fix the problem, you would need to 
get the last version of Trnsys16 that was released and you would need to 
obtain a Type460 install that did not replace the TRNDll but which 
contains its own DLL. If you can send me the *.dck file that the 
Simulation Studio is producing, it might give me some more ideas.
Kind regards,
  David



On 11/10/2012 05:46, hassan bouhess wrote:
> Hello Mr David,
>  You will find Attached the file*lst and file*log.
>
> thank you for your help.
> Best
> Hassan
>
> 2012/11/9 David BRADLEY <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>>
>
>     Hassan,
>       Please send me the *.lst file that is generated when you run the
>     simulation and I'll see if I can find the problem.
>     Best,
>      David
>
>
>     On 11/9/2012 10:11, hassan bouhess wrote:
>>     Dear all,
>>     Whene i simulate the Type.460 in TRNSYS.16, i have this probleme
>>     in the *lesting file*, the probleme is  i don't understand what
>>     means :
>>
>>     ** Fatal Error at time :         0.000000
>>
>>         Generated by Unit     : Not applicable or not available
>>
>>         Generated by Type     : Not applicable or not available
>>
>>         TRNSYS Message     48 : The TRNSYS processor has reported
>>     that an unrecognized control card was found while trying to read
>>     the input file.  This error can be caused by underspecifying a
>>     required number of items in the input file.  For example,
>>     specifiying only 9 parameters after a "PARAMETERS 10" card has
>>     been read can cause this error. The line that caused this error
>>     is listed in the reported information below.
>>
>>         Reported information  : TIME_REPORT
>>
>>     *** Fatal Error at time :         0.000000
>>
>>         Generated by Unit     : Not applicable or not available
>>
>>         Generated by Type     : Not applicable or not available
>>
>>         Message               : Errors found while processing the
>>     TRNSYS input file.
>>
>>
>>     Has anyone had this problem before?
>>
>>     I am very thankful for any suggestions how to solve this
>>     probleme. I have no other ideas so far.
>>
>>
>>     Best
>>
>>     Hassan
>>
>>
>>
>>     _______________________________________________
>>     TRNSYS-users mailing list
>>     TRNSYS-users at cae.wisc.edu  <mailto:TRNSYS-users at cae.wisc.edu>
>>     https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>     -- 
>     ***************************
>     David BRADLEY
>     Principal
>     Thermal Energy Systems Specialists, LLC
>     22 North Carroll Street - suite 370
>     Madison, WI  53703 USA
>
>     P:+1.608.274.2577
>     F:+1.608.278.1475
>     d.bradley at tess-inc.com  <mailto:d.bradley at tess-inc.com>
>
>     http://www.tess-inc.com
>     http://www.trnsys.com
>
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20121112/446934fa/attachment-0001.htm>