[TRNSYS-users] Problem with simulation studio

[Damien Gondre]

Samir,

Have you tried converting your data to *.txt or *.csv format?
I'm not sure Type 9 is able to directly read *.xls files.

Damien Gondre.
---------------------------------------
Centre de thermique de Lyon (CETHIL)
UMR 5008 - Insa de Lyon, UCBL, CNRS
Bâtiment Sadi Carnot
69621 Villeurbanne Cedex
France
+334 72 43 84 68


On Fri, May 25, 2012 at 9:42 AM, Samir CHEHAL <samir.chehal at ingerop.com>wrote:

> Dear Users,
>
> I have a problem with Simulation Studio.
>
> I try to use  excel data file with a type 9 (This data file contain
> cooling and heating loads from another software, this data file contain
> 8760 data (loads hour per hour)).
>
> I must use theses data to be used in an equation, but I don't know how I
> can do.
>
> I placed a type 9c (attached with an excel data files (in external
> files)), I try to connect him with a type 25c to check if the model
> running. But there is an error.
>
> I don't know how  to get back theses 8760 data from excel file ?
>
> This is the error message :
>
>
> *(Voir fichier joint : TEST.lst)*
>
> Best regards
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120525/636fd448/attachment-0005.htm>