[TRNSYS-users] problem coupling EES and TRNSYS

[David BRADLEY]

Malak,
   Unless you modified the example, it assumes that EES is installed in 
the c:\EES32\ directory. The second thing to make sure of is that you 
are using one of the later TRNSYS 16 releases as there were some 
bugfixes made along the way. I believe that 16.1.0004 was the final 
TRNSYS 16 release. If neither of those is the problem then are you able 
to determine whether the error comes up before or after the EES window 
appears in the task bar at the bottom of the screen?
Best,
  David


On 5/15/2012 09:23, dakhli malak wrote:
> Hi everybody,
>
> i am using EES professional version 7.693 and TRNSYS version 16. i 
> tried to run the example of the calling EES (compressor) but it's not 
> working and not even indicating the error !!
>
> cordially,
> Malak
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120515/3b1583f1/attachment-0005.htm>