[TRNSYS-users] trnflow16 - atrium

[Mariëlle Nuchelmans]

Hello,

I have a problem regarding trnflow (version 16). I have got to model the following:

An atrium 2 zones heigh
A mechanical ventilation systeem, supply in the bottom zone, exhaust in the topzone (temperature 18 degree celsius)

I made a simple model:  EN                        - AN                           -  FA                                        - CR                               -    FA                                      -  EN
                                               Outside - temperature 18 degree - fan into bottom zone - cr between zones -  exhaust fan to outside -  outside

Problem is that when I plot the flow through the crack, the results doesn't made sense. For example: the fan delivers 120 kg/h, through the crack goes 25000 kg/h??

Crack has a Cs of 1 kg/s at 1 Pa.

If anyone got any ideas where to look for the solution, please let me know.

With kind regards,

Mariëlle
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120514/9f5881c9/attachment-0005.htm>