[TRNSYS-users] TRNSYS-users Digest, Vol 89, Issue 19

Thu May 10 15:36:46 PDT 2012

hi everybody,

well, i am beginner with trnsys. I tried the example of the EES calling
function but it's not working!
i asked some other people and it's the same for them!! do you have idea
about it ?
otherwise, do you advice me to work with type107 instead of EES ? I need to
make the modeling
of the solar cooling system for a building under Tunisian climate (it's a
Bachelor thesis, so there's a pressure of time)

best regards.

PS: Thank you for clarification Mr. Jochen.

On Thu, May 10, 2012 at 7:00 PM, <trnsys-users-request at cae.wisc.edu> wrote:

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. run simulation (use new component) (Eva gklezakou)
>   2. Re: run simulation (use new component) (Jeff Thornton)
>   3. Re: solar cooling (H2O/LIBR single effect absorption machine)
>      (Jochen Doell)
>   4. External data files for heat pump & absorbtion    chiller
>      (Santeri Siren)
>   5. insertion of a balcony (Alessandro Rinaldi)
>
>
> ---------- Forwarded message ----------
> From: Eva gklezakou <gklezakoue at gmail.com>
> To: trnsys-users <TRNSYS-users at cae.wisc.edu>
> Cc:
> Date: Wed, 9 May 2012 21:11:02 +0100
> Subject: [TRNSYS-users] run simulation (use new component)
> Dear Sirs,
>
> I am a beginner user of TRNSYS so I am not sure if I use it in the right
> way. I want to use a new component which I receive but even though I copy
> paste the *.dll file of the PCM component to the exe folder of TRNSYS and
> the *.tmf to the proformas still have an error which says that " A TYPE was
> called in the TRNSYS input file but was either not linked into trndll.dll
> or was not found in an external dll. A dummy subroutine was called in its
> place. Please link the TYPE or remove it from the input file".
> Thank you.
>
> Regards,
> Eva
>
>
> ---------- Forwarded message ----------
> From: Jeff Thornton <thornton at tess-inc.com>
> To: <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Wed, 09 May 2012 15:16:55 -0500
> Subject: Re: [TRNSYS-users] run simulation (use new component)
> **
>
> The user-created DLL's don't go in the Exe folder.  They go in the correct
> spot in the UserLib directory (depends on whether the DLL was created as a
> release version DLL or a debug-version DLL).
>
>
>
> Jeff
>
>
>
> ---
>
> Jeff Thornton
>
> *President - TESS LLC*
>
> *22 N. Carroll Street, Madison WI USA 53703*
>
> *Office: (608) 274-2577  Fax: (608) 278-1475*
>
> *www.tess-inc.com*
>
> *E-Mail: thornton at tess-inc.com*
>
>
>
> On 05/09/2012 3:11 pm, Eva gklezakou wrote:
>
> Dear Sirs,
> I am a beginner user of TRNSYS so I am not sure if I use it in the right
> way. I want to use a new component which I receive but even though I copy
> paste the *.dll file of the PCM component to the exe folder of TRNSYS and
> the *.tmf to the proformas still have an error which says that " A TYPE was
> called in the TRNSYS input file but was either not linked into trndll.dll
> or was not found in an external dll. A dummy subroutine was called in its
> place. Please link the TYPE or remove it from the input file".
> Thank you.
>
> Regards,
> Eva
>
>
>
> ---------- Forwarded message ----------
> From: Jochen Doell <jochen.doell at ise.fraunhofer.de>
> To: dakhli malak <dakhli.malak at gmail.com>
> Cc: trnsys-users at cae.wisc.edu
> Date: Thu, 10 May 2012 09:01:44 +0200
> Subject: Re: [TRNSYS-users] solar cooling (H2O/LIBR single effect
> absorption machine)
> Dear Dakhli,
>
> type107 is a performance map type, i.e. you have to supply a table with
> (steady state) operatingg conditions from which the type takes its current
> performance (including interpolation).
> When you use a calling function like calling EES, you have your chiller
> modelled in a different environment (here the Engineering Equation Solver).
> There you can have for example an advanced physical model, which might be
> hard or impossible to program in sequential fortran code as used for TRNSYS.
>
> Best regards,
> Jochen
>
> Am 09.05.2012 10:32, schrieb dakhli malak:
>
>> Hi everybody,
>>
>> i read some articles and i found that some people are using type107 in the
>> modelling of the machine
>> and some others are using the calling function of EES. So, what's the
>> difference between them ?
>>
>> cordially,
>>
>>
> --
> ______________________________**___________________
>
> Dipl.-Ing. (FH) Jochen Döll
> Division Thermal Systems and Buildings
>
> Fraunhofer-Institut für Solare Energiesysteme ISE
> Heidenhofstrasse 2, 79110 Freiburg, Germany
>
> Phone: +49 (761) 4588-5468 Fax: +49 (761) 4588-9000
> jochen.doell at ise.fraunhofer.de
> www.ise.fraunhofer.de
> ______________________________**___________________
>
>
>
>
> ---------- Forwarded message ----------
> From: Santeri Siren <santeri.siren1 at gmail.com>
> To: "trnsys käyttäjät" <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Thu, 10 May 2012 16:33:51 +0300
> Subject: [TRNSYS-users] External data files for heat pump & absorbtion
> chiller
> Dear all,
>
> I need to use a water to water ground heat pump (type 668) and absorbtion
> chiller in my simulations. It seems to be very difficult to find product
> catalogues that include the information required in the external data
> files. Could someone with experience please tell me which manufacturers do
> provide this kind of information and perhaps send me a link. The only
> catalogue data file that I was able to for water to water heat pump was
> this one from Carrier:
>
>
> http://www.docs.hvacpartners.com/idc/groups/public/documents/techlit/50psw-3pd.pdf
>
> Best regards. Santeri Siren
>
>
>
>
> ---------- Forwarded message ----------
> From: Alessandro Rinaldi <alexius87 at hotmail.it>
> To: <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Thu, 10 May 2012 18:19:20 +0200
> Subject: [TRNSYS-users] insertion of a balcony
>  hi, which type should I use to insert a balcony that shades the wall
> below and the window? thanks
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120511/1c242669/attachment-0005.htm>