[TRNSYS-users] jEPlus for TRNSYS parametrics

[saleh saadi]

Dear Dr Zhang, 


Thanks for doing this great job!!!.
I used the template file provided with GenOpt (folder is attached). 

I tried using this version with TRNSYS 16 and works pretty well and quick (24 parametric runs in less than a minute). Is it possible to add a browsing tab to edit the building file (*.bui). 

Although, I could run the parametric files but no output was extracted. In my template file, I normally extract output in a text file but jEPlus could not copy the file or save it in any format. Is there a way to save the text file in the folder file similar to input file. In addition, I can't find the "trnsysout.csv" output file anywhere. Is that enabled in this version? 


regards,
saleh alsaadi 



________________________________
 From: Yi Zhang <YiZhang at dmu.ac.uk>
To: bjoern.nienborg at ise.fraunhofer.de 
Cc: trnsys-users at cae.wisc.edu 
Sent: Monday, May 7, 2012 7:58 AM
Subject: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics
 

Hi Bjoern,
 
I should provide an example TRNSYS parametric project in the package; I will do that in a couple of days. In the meantime, could you take a look at the E+ example? Just open the project in the example/ folder, and you will see how to specify parameters. Unlike E+, the weather file in a TRNSYS model is normal parameter. You just need to create a parameter and think of a search string (e.g. "@@weather@@") to put in the place of the weather file in the .DCK (or .TRD) file, and then specify the alt. values of the parameter using syntax like "{weather1.txt, weather2.txt, ...}". 
 
Here is quick video of how to use jEPlus (http://www.youtube.com/watch?feature=player_embedded&v=9v8k52IyvV4). Again it is for E+ rather than TRNSYS; but the principle is the same.
 
Cheers,
 
Yi
 
Dr Yi Zhang
IESD, De Montfort University, United Kingdom

________________________________
 From: Bjoern Nienborg [mailto:bjoern.nienborg at ise.fraunhofer.de]
Sent: Mon 07/05/2012 14:30
To: Yi Zhang
Subject: Re: [TRNSYS-users] jEPlus for TRNSYS parametrics


Hi Yi,

I just had a short look at it and did not find an option to vary sets of values, e.g. if I vary a location I need to specify the name of the weather data file, the latitude, shift in solar time and possibly some other values. If there is this option and I did not see it, please ignore my comment.

Regards,

björn

Am 07.05.2012 13:43, schrieb Yi Zhang: 
Hi all,
> 
>jEPlus is an open source parametric tool for managing EnergyPlus simulations. Due to popular demand, support for TRNSYS simulations has been added to the latest version (jEPlus v1.3beta). Please visit http://www.iesd.dmu.ac.uk/jeplus/ for more details. Please note we are currently testing the new version; any comments or suggestions will be much appreciated.
> 
>Regards,
> 
>Yi
> 
>Dr Yi Zhang
>IESD, De Montfort University, United Kingdom
>
>
>_______________________________________________
TRNSYS-users mailing list TRNSYS-users at cae.wisc.edu https://mailman.cae.wisc.edu/listinfo/trnsys-users 


-- 
Dipl.-Ing. (FH) Björn Nienborg, M.Sc.
Division Thermal Systems and Buildings
Fraunhofer Institut für Solare Energiesysteme ISE
Heidenhofstr. 2, 79110 Freiburg, Germany
Tel.: +49 (0)761 4588-5883 FAX: +49 (0)761 4588-9000
http://www.ise.fraunhofer.de/
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120507/2f5b8613/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: GenOpt-Type56.zip
Type: application/zip
Size: 241217 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120507/2f5b8613/attachment-0001.zip>