[TRNSYS-users] ventilation double flux on trnsys

Damien Gondre damien.gondre at insa-lyon.fr
Fri Mar 30 06:13:17 PDT 2012


Dear Faustine,

You have to use a heat exchanger in the simulation studio (type 5 or type
91 for instance) and link :
   - [Type 56] Tair - Zone A -------------------------> [Heat exchanger]
Hot side temperature
   - [Weather data] Ambient temperature -------> [Heat Exchanger] Cold side
temperature

Air flowrate should be the same on both (hot and cold) sides. You can set
it directly into the heat exchanger type if it is constant or define an
equation which set the air flowrate considering other conditions.

King regards,

Damien Gondre
---------------------------------------
Centre de thermique de Lyon (CETHIL)
UMR 5008 - Insa de Lyon, UCBL, CNRS
Bâtiment Sadi Carnot
69621 Villeurbanne Cedex
France
+334 72 43 84 68



On Fri, Mar 30, 2012 at 2:12 PM, faustine escoffier <
escoffier.faustine at gmail.com> wrote:

> How to modelise a double flux ventilation on trnsys, in the simulation
> studio?
> Thanks.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120330/7926e8c4/attachment-0005.htm>


More information about the TRNSYS-users mailing list