[TRNSYS-users] Error message of TRNSYS simulation concerning matrix

[David BRADLEY]

Pauline,
   The error message comes from the building (note where it says that 
Type56 is generating the error. "3" refers to Type 56's unit number; all 
components in a system are assigned a unique identifier called a UNIT 
number. This is not an error that I have run across before and I am not 
sure how to suggest you solve it. I would start by connecting the 
building to the weather file and an online plotter only and to plot the 
ambient and zone temperatures. If you still get the same error then I 
think you may need to contact your distributor for some direct assistance.
Kind regards,
  David


On 3/23/2012 10:01, Pauline GELIN wrote:
>
> Hi,
>
> I meta problem when I runned simulation where I do not understand the 
> meaning.
>
>
> Here it is:
>
>
>
> Could youtell me if the error comes from the bui file or the links 
> from tpf file (please find attached)?
>
> Where do I have to find the answer? Whatisthe unit3shown inthe error ?
>
> Thank you very much for your help.
>
> Best regards,
>
> Pauline Gelin
>
> Fluid design engineer
>
> **
>
> *Description : cid:image007.jpg at 01CC9EDB.F49EDC60***
>
> *Description : Description : Description : Description : Description : 
> logo Woopa***
>
> 	
>
> *KATENE*
>
> **
>
> *10 avenue des Canuts -- 69120 VAULX EN VELIN*
>
> *0437453347***
>
> **
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120327/56f032cf/attachment-0005.htm>