[TRNSYS-users] (no subject)

[64 at enetec.it]

Dear All,

I ask you, if possible, about the correctness of the procedure I am using to
model a multistory building. I am working in autocad redrawing all the floor
using closed polyline for each zone. The goal is to construct a sort of
wildcard plan, which is obtained from the intersection of all the possible
zones which I can find at each floor. This approach should admit me to
extrude in sketch up any possible thermal zone of the model considering it
as a sum of different microvolumes, (combined in a different way for each
floor).What do you think about it. 

In other words is it perhaps possible to model a zone with a splitted wall?
This should mean that, for example, the ceiling of a single zone can be
splitted in two part, one adjoining with a zone, for example, the other with
another..

Thank you!

Matteo

 

ing. Matteo Mariotti

 

Enetec S.r.l.

Ingegneria Energetica e Realizzazioni Impanti

ROMA Via del Maggiolino, 125 - 00155 Roma

telephone: 0039.(0)6.22754810 int.21

mobile:      0039.328.2161722

mailto:        <mailto:sergio.palmitessa at guest.telecomitalia.it>
64 at enetec.it

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120323/eca62f35/attachment-0005.htm>